TDN2

Desk Microphone with Dante Network Output

Product Description

TDN2 is a desktop conference microphone with Dante interface. It adopts a new square microphone tube and a condenser supercardioid capsule to accurately pick up the sound, reducing the interference of ambient noise. The V-shaped base spreads the weight of the microphone more evenly, making it more stable on the table. To connect Relacart TDM  digital control software by a Cat5 network cable to enable the microphone to have IP address visualization and customize the microphone's low cut, EQ, light color and volume. The above settings can be copied directly from certain microphone to another through the software. Unique troubleshooting function, when press the CALL button the LED light of the microphone will flash, and the position of the microphone can be quickly found.

Technical Specifications

Frequency Response: 20Hz-20KHz


Gain adjustment: 6-level gain adjustable


Bass Cut: 150Hz, 18dB/Octave


Signal-to-noise ratio: 65dB, 1KHz at 1Pa


Base power supply mode: POE IEEE802.3 af


Output interface: standard Ethernet interface


DANTE network: RJ45 connector, above 100Mbps, above CAT5 or CAT6


Indicator light: LED multi-color adjustable status indicator


Equalizer: 4-band parametric equalizer, set by control software


Microphone up and down adjustment angle: 48 degrees


Power consumption: 2.3W


Weight: about 800g


Overall size (mm): length 225*width 135*height 95/220 (minimum angle/highest angle)


Colour:Black/Champagne gold

Support

Operation manual

TDN2 datasheet

Product Brochure

TDN2 brochure

Request a quote or More information

Fill out the form below for someone to contact you reguarding quotes and questions.Or visit our contact page for general contact information.

Tel.: 020 3810 9133/020 3810 9224

Fax: 020 3810 9384

Mail: info@relacart.com

Copyright @ RELACART All Rights Reserved | Sitemap | Powered by Reanod