Home > Products-zong > Products > Antenna Distribution system > Antenna Distribution System

R-24D

Antenna Distribution System

Product Description Performance Introduction Technical Specifications

Product Description

R-24D is an antenna distribution system developed and produced by Relacart. lt can send the RF signal of one antenna to multiple receivers, and can achieve the best performance even in complex RF environments. lt provides a variety of filters that can be flexibly selected according to actual use, and the antenna gain can be remotely controlled by software. lt's stable functional characteristics are suitable for UHF wide bandwidth wireless systems and support the application of 2-4Relacart wireless series or other series of wireless systems.

Performance Introduction

Software Control

Equipped with dedicated control software, after connection, the antenna gain, filter range and other parameters can be adjusted remotely, making the setting and debugging more convenient.

Multiple filters

A variety of filters are available for selection, which can be flexibly adjusted according to specific usage requirements to provide the most suitable frequency signal and the protection system will not be affected by signals from other frequency bands

Cascade port

With an RF signal cascade port, the signal can be transmitted to the spectrum manager or other antenna distribution system, making it easy to expand the antenna distribution system.

Technical Specifications

RF Input

Connector Type: BNC

Configuration: Unbalanced, Active

Bandpass Filter:

Wideband 470-698MHz

Band 1 470-603MHz

Band 2 500-600MHz

Band 3 521-651MHz

Band 4 570-698MHz

Impedance: 50 Ω

Bias Voltage: 12 V DC, 150 mA (300 mA maximum)

Distribution Output

Connector Type: BNC (4 pairs)

Configuration: Unbalanced, Active

Impedance: 50 Ω

Gain Adjust Range

Cascade Enabled: -15 dB to 0 dB (in 1 dB steps)

Cascade Disabled: -12 dB to +3 dB (in 1 dB steps)

Output Intermodulation Intercept Point: >25 dBm, typical

Cascade Output

Connector Type: BNC (1 pair)

Configuration: Unbalanced, Wideband

Impedance: 50 Ω

Insertion Loss: <5 dB

Dimensions: 410 (W) x 206 (D) x 43 (H)

Power Requirements: 100 to 240 VAC, 50-60 Hz

Request a quote or More information

Fill out the form below for someone to contact you reguarding quotes and questions.Or visit our contact page for general contact information.